Points: 0/0
Prestige Perks: 0/0
Stat Trainings: (0/50)
Tomino, Akane
["I'll build the future with these hands."]
General Information Age: 16
Gender: Female
Height: 5'5"
Weight: 138 Lbs.
Physical Features:
- Face/head: Akane is not beautiful or sexy, but instead possesses a cute charm. She has a round-shaped head with a cute button nose and large green eyes. Her eyebrows are perfectly sized. Akane's ears aren't massive, but they are bigger than usual and poke out from under her wavy gray hair, adding to her cute look.
- Body: Akane possess average proportions but is towards the athletic side for the most part. Born to a village blacksmith, she has spent the majority of her life helping her father in his shop and this can be seen in her toned physique. Her core and arms are particularly muscular due to upper-body workout of a blacksmith. Overall, she has the appearance of a sporty girl.
- Notable Features: None in particular.
Personality:
- General: In general, Akane is a very dutiful girl. Responsibility is something she respects almost as much as her elders, and she always does her best to do a good job and please those above her. Additionally, as the eldest in a family of three girls, Akane felt the need to act more boyish and to become someone who could inherit her fathers shop... At the same time, Akane is not entirely interested in normal black smithery. She hopes to become an Engineer. A newer trade being touted around the high academies of Kumogakure.
- Hopes/Dreams: To use her talents and knowledge to better the world.
- Fears: She cannot live up to her fathers expectations; her path is different from a simple blacksmith.
- Combat Mentality: Akane is not very talented in combat, though generally when she fights it involves her hammer.
Battle Information Village: Kumogakure no Sato
Rank: Chuunin
- Ninjutsu: 20
- Taijutsu: 10
- Genjutsu: 1
- Stamina: 15
- Control: 14
- Strength:10
- Speed: 5
- Instinct: 10
Back Pouch
-5x Flash Tag
Belt, right-side. hanging
Volnir
Volnir was made by Toshiro for Akane when she graduated from the academy. It is a war-hammer that can also be used for smithing, one end broad with the other being more pointed. Ornately made of the highest-quality steel with gold detailing, Volnir has numerous fuuinjutsu embedded into it, making it always release electricity statically and capable of releasing a varying Raiton blast. Volnir's maximum electrical output is a lightning bolt up to 25 meters away at a speed of 20 and strength of 20, but this can be toggled down as desired.
Primary Affinity: Doton
Abilities and Concentrations
Abilities | |
---|---|
First Ability | |
Second Ability | |
Third Ability |
Concentrations | |
---|---|
Ninjutsu | Doton: Raiton Affinity: Cobalt: |
Taijutsu | |
Genjutsu |
Jutsu
DotonShow
*Doton • Dirt Cloud
D-Rank Ninjutsu
After performing the correct hand seals the user will form a 1 meter diameter ball of loose dirt in front of them, launching it off up to 10 meters away at a strength of 4 and speed of 6. Upon impact the ball of loose dirt breaks apart forming a vision-impairing cloud of dirt with a 3 meter radius.
*Doton • Wall
D-Rank Ninjutsu
After performing the correct hand seals the user will form a solid stone wall up to 5 meters away from them at a speed of 6. The wall has a strength of 4 and is 3x3x1 meters large.
*Doton • Trip Fault
D-Rank Ninjutsu
After performing the correct hand seals, the user will cause a 1/2 meter pot hole to appear at a speed of 5 somewhere within 7 meters.
*Doton • Binding Formation
D-Rank Ninjutsu
After channeling doton chakra into their foot the user will slam the ground within 3 meters of a target's feet with their heel, causing a formation of rock to shoot upwards at a speed of 6 binding the target's feet at a strength of 4.
*Doton • Manica
C-Rank Ninjutsu
By channeling doton chakra into their arm, the user will form rock from their shoulder downward, encasing their forearm and hand in rough and simplistic layered plates of stone. The stone passes over the hand on the back-side but leaves the palm-side uncovered allowing full dexterity of the hand for seals. This essentially resembles a manica, which is a segmented armor that spans the length of the arm. The armor has a strength of 15 and forms at a speed of 5.
*Doton • Tremors
C-Rank Ninjutsu
After performing the correct hand seals and holding the last one, the user will stomp their foot on the ground, releasing their chakra in it and causing it to tremor violently for one post. The tremors radiate out from the user in a 10 meter radius, knocking down anyone standing on the ground with less than 10 taijutsu. Lasts as long as the last seal is held, for up to 3 posts.
Doton • Structural Manipulation
C-Rank Ninjutsu
After performing the correct hand seals and channeling doton chakra into her hand and placing it upon an earthen structure, Akane can manipulate the shape of the earth at the level of simple and basic geometric shapes- circle, squares, and triangles. This allows her to make holes in walls, or other seemingly simple structural modifications and can be done at a speed of 10. There is no strength involved in the jutsu for the displaced earth, meaning it does not have an attack value. No other jutsu can be used during this time and Akane must focus. The size limit of her change can be up to 3x3 meters maximum.
Doton • Do-micile
B-Rank Ninjutsu
After performing the correct hand seals the user will form a basic dome-styled home with a 7 meter radius up to 25 meters away from them at a speed of 15. The material of the home has a durability of 25 and roughly a foot thick, it's curved style offering additional defensive support against projectiles. The technique can be used to create a shelter from the elements, or a protective dome in the heat of combat.
*Doton • Moving Earth Core
B-Rank Ninjutsu
After performing the correct hand seals the user places their palms on any earthen ground, channeling chakra into it allowing them to lower or raise any 5x5 meter segment of the ground within 15 meters at a speed of 30 and strength of 10. The maximum distance the segment can be lowered or raised is 20 meters. The user must keep their palms on the ground during the course of the jutsu. If they remove their palms at any time, the jutsu will end and they will not be able to raise or lower it any further without redoing the technique.
D-Rank Ninjutsu
After performing the correct hand seals the user will form a 1 meter diameter ball of loose dirt in front of them, launching it off up to 10 meters away at a strength of 4 and speed of 6. Upon impact the ball of loose dirt breaks apart forming a vision-impairing cloud of dirt with a 3 meter radius.
*Doton • Wall
D-Rank Ninjutsu
After performing the correct hand seals the user will form a solid stone wall up to 5 meters away from them at a speed of 6. The wall has a strength of 4 and is 3x3x1 meters large.
*Doton • Trip Fault
D-Rank Ninjutsu
After performing the correct hand seals, the user will cause a 1/2 meter pot hole to appear at a speed of 5 somewhere within 7 meters.
*Doton • Binding Formation
D-Rank Ninjutsu
After channeling doton chakra into their foot the user will slam the ground within 3 meters of a target's feet with their heel, causing a formation of rock to shoot upwards at a speed of 6 binding the target's feet at a strength of 4.
*Doton • Manica
C-Rank Ninjutsu
By channeling doton chakra into their arm, the user will form rock from their shoulder downward, encasing their forearm and hand in rough and simplistic layered plates of stone. The stone passes over the hand on the back-side but leaves the palm-side uncovered allowing full dexterity of the hand for seals. This essentially resembles a manica, which is a segmented armor that spans the length of the arm. The armor has a strength of 15 and forms at a speed of 5.
*Doton • Tremors
C-Rank Ninjutsu
After performing the correct hand seals and holding the last one, the user will stomp their foot on the ground, releasing their chakra in it and causing it to tremor violently for one post. The tremors radiate out from the user in a 10 meter radius, knocking down anyone standing on the ground with less than 10 taijutsu. Lasts as long as the last seal is held, for up to 3 posts.
Doton • Structural Manipulation
C-Rank Ninjutsu
After performing the correct hand seals and channeling doton chakra into her hand and placing it upon an earthen structure, Akane can manipulate the shape of the earth at the level of simple and basic geometric shapes- circle, squares, and triangles. This allows her to make holes in walls, or other seemingly simple structural modifications and can be done at a speed of 10. There is no strength involved in the jutsu for the displaced earth, meaning it does not have an attack value. No other jutsu can be used during this time and Akane must focus. The size limit of her change can be up to 3x3 meters maximum.
Doton • Do-micile
B-Rank Ninjutsu
After performing the correct hand seals the user will form a basic dome-styled home with a 7 meter radius up to 25 meters away from them at a speed of 15. The material of the home has a durability of 25 and roughly a foot thick, it's curved style offering additional defensive support against projectiles. The technique can be used to create a shelter from the elements, or a protective dome in the heat of combat.
*Doton • Moving Earth Core
B-Rank Ninjutsu
After performing the correct hand seals the user places their palms on any earthen ground, channeling chakra into it allowing them to lower or raise any 5x5 meter segment of the ground within 15 meters at a speed of 30 and strength of 10. The maximum distance the segment can be lowered or raised is 20 meters. The user must keep their palms on the ground during the course of the jutsu. If they remove their palms at any time, the jutsu will end and they will not be able to raise or lower it any further without redoing the technique.
CobaltShow
Compass
D-Rank Ninjutsu
After performing the correct hand seals Akane will form a small cobalt contraption, roughly 3cm in diameter. It is a concave shape and has a needle that rests precariously upon a point. Basically, she creates a compass.
Cobalt Tools
D-Rank Ninjutsu
After performing the correct hand seals Akane will form a set of up to 10 basic projectiles made of cobalt, such as kunai, shuriken, or senbon, in their hand. Created tools have a durability of 5.
Cobalt Chain
D-Rank Ninjutsu
After performing the correct hand seals Akane will form a chain of cobalt either up to 25 meters long in her hand. It has a durability of 5.
Magnetic Restraints
D-Rank Ninjutsu
After performing the correct hand seals Akane will create two cobalt rings with a hinge that allows them to open and close at a speed of 1, each opposite producing different polls. Once closed, the ring locks and has a durability of 9.
Explosive Kunai +
D-Rank Ninjutsu
After performing the correct hand seals Akane will form a single explosive kunai in her hand. When destroyed or kai'd it explodes with the force of a single tag, scattering magnetically charged cobalt shrapnel everywhere.
Track
C-Rank Ninjutsu
Prequisite: 15 Ninjutsu
Akane has spent quite a deal of her time since promotion to Chuunin researching a new invention. For the invention, a perfectly smooth shape that can be exactly replicated over and over again was necessary. As such, after performing the correct hand seals Akane will form 10 meter long, 5-inch wide rail of cobalt with a shallow U shape, resembling a bracket. This track is created at a speed of 5 and has a durability of 25.
Electric Rickshaw
C-Rank Ninjutsu
Prequisite: 15 Ninjutsu
Part of her new invention, after the appropriate hand seal, Akane will form a 7x2.5x2x5 meter shaped cobalt box with a roof and semi-open sides. The box is created at a speed of 5 and with a durability of 25. The bottom of the box has rails alongside it, forming a sort of top-hat shape that fit perfectly into her tracks.
Explosive Railspike
C-Rank Ninjutsu
Prequisite: 15 Ninjutsu
After the appropriate hand seal, Akane will form a 2-foot long, 3-inch diameter spike out of cobalt at a speed of 10. The spike explodes with the force of 4 explosive tags on impact. The spike fits perfectly into her tracks.
Trap Box
B-Rank Ninjutsu
After the appropriate hand seal, Akane will form a 3x3 cobalt box, filled with 50 kunai at a speed of 15. The box has a durability of 25. The top of the box has 50 round circle openings. allowing the kunai to escape the top of the box.
Explosive Railspike v2
B-Rank Ninjutsu
After the appropriate hand seal, Akane will form a 2-foot long, 3-inch diameter spike out of cobalt at a speed of 20. The spike explodes at B-Rank on impact. The spike fits perfectly into her tracks.
D-Rank Ninjutsu
After performing the correct hand seals Akane will form a small cobalt contraption, roughly 3cm in diameter. It is a concave shape and has a needle that rests precariously upon a point. Basically, she creates a compass.
Cobalt Tools
D-Rank Ninjutsu
After performing the correct hand seals Akane will form a set of up to 10 basic projectiles made of cobalt, such as kunai, shuriken, or senbon, in their hand. Created tools have a durability of 5.
Cobalt Chain
D-Rank Ninjutsu
After performing the correct hand seals Akane will form a chain of cobalt either up to 25 meters long in her hand. It has a durability of 5.
Magnetic Restraints
D-Rank Ninjutsu
After performing the correct hand seals Akane will create two cobalt rings with a hinge that allows them to open and close at a speed of 1, each opposite producing different polls. Once closed, the ring locks and has a durability of 9.
Explosive Kunai +
D-Rank Ninjutsu
After performing the correct hand seals Akane will form a single explosive kunai in her hand. When destroyed or kai'd it explodes with the force of a single tag, scattering magnetically charged cobalt shrapnel everywhere.
Track
C-Rank Ninjutsu
Prequisite: 15 Ninjutsu
Akane has spent quite a deal of her time since promotion to Chuunin researching a new invention. For the invention, a perfectly smooth shape that can be exactly replicated over and over again was necessary. As such, after performing the correct hand seals Akane will form 10 meter long, 5-inch wide rail of cobalt with a shallow U shape, resembling a bracket. This track is created at a speed of 5 and has a durability of 25.
Electric Rickshaw
C-Rank Ninjutsu
Prequisite: 15 Ninjutsu
Part of her new invention, after the appropriate hand seal, Akane will form a 7x2.5x2x5 meter shaped cobalt box with a roof and semi-open sides. The box is created at a speed of 5 and with a durability of 25. The bottom of the box has rails alongside it, forming a sort of top-hat shape that fit perfectly into her tracks.
Explosive Railspike
C-Rank Ninjutsu
Prequisite: 15 Ninjutsu
After the appropriate hand seal, Akane will form a 2-foot long, 3-inch diameter spike out of cobalt at a speed of 10. The spike explodes with the force of 4 explosive tags on impact. The spike fits perfectly into her tracks.
Trap Box
B-Rank Ninjutsu
After the appropriate hand seal, Akane will form a 3x3 cobalt box, filled with 50 kunai at a speed of 15. The box has a durability of 25. The top of the box has 50 round circle openings. allowing the kunai to escape the top of the box.
Explosive Railspike v2
B-Rank Ninjutsu
After the appropriate hand seal, Akane will form a 2-foot long, 3-inch diameter spike out of cobalt at a speed of 20. The spike explodes at B-Rank on impact. The spike fits perfectly into her tracks.
History
Historical AccountsShow
Akane was born to a relatively skilled village blacksmith, Tomino Masahiro. His shop had been owned by his father and had been making tools and weaponry for shinobi for generations. Masahiro himself had graduated the academy and was strong in Katon and Taijutsu, perfect for a village smith. Masahiro hoped to pass the shop to his son in the future, but his first born happened to be a girl... Akane. His second and third were also girls... As a result, Masahiro raised Akane to be the son he never had. Growing up she played sports with the local boys, caught bugs, and did all the things any normal boy in the village did. She studied her fathers smithing and also practiced hitting a weighted-rubber mallet against a surface to build strength in her arms. From a young age she knew her responsibility would be to inherit her fathers shop.
Eventually, Akane entered the academy. She was lacked the instinct for combat, the strategy, and the body finesse and generally did poorly at Genjutsu. Regardless, her creativity and skill in Ninjutsu allowed her to gain the confidence of her instructors. As she continued to learn Doton, she would practice smithing with her father at home creating traditional weapons like katana or even Kunai. By her 12 she had created a new Doton type that merged her own chakra and strange manipulation to create Cobalt. She began to dabble in making traps and more complex mechanical weaponry, quickly earning the respect of many others around her and gaining her the moniker of "Engineer". By 13, she had graduated the academy and had begun to work within Kumogakure as a support ninja, working on infrastructure and also at her dad's Blacksmith shop. Her dad gifted her Volnir, and though she was not interested in her dads work she felt an extreme responsibility to work at the shop.
Though remarkably normal and lack-luster in combat, in her Genin years she proved to be an extremely capable engineer and someone with potential in Ninjutsu, having mastered 3 styles early on. As such, at 14 she was offered the chance to help build some relief shelters for refugees during the KCW. Doing so with extreme efficiency gained her the gratitude of her countrymen and her village. Following this, she was asked by the 9th Raikage to begin using her Cobalt to develop a special project. For the last two years she has designed and tested an idea for "an electric rickshaw" that would change the way normal people lived.
With her success in design, she was promoted to Chuunin and is working under directions from the Kage to research projects that would advance the infrastructure of Kumogakure and the world. Currently, she is part-time attending classes to learn more on Fuuinjutsu, a technology necessary for infrastructure.
Eventually, Akane entered the academy. She was lacked the instinct for combat, the strategy, and the body finesse and generally did poorly at Genjutsu. Regardless, her creativity and skill in Ninjutsu allowed her to gain the confidence of her instructors. As she continued to learn Doton, she would practice smithing with her father at home creating traditional weapons like katana or even Kunai. By her 12 she had created a new Doton type that merged her own chakra and strange manipulation to create Cobalt. She began to dabble in making traps and more complex mechanical weaponry, quickly earning the respect of many others around her and gaining her the moniker of "Engineer". By 13, she had graduated the academy and had begun to work within Kumogakure as a support ninja, working on infrastructure and also at her dad's Blacksmith shop. Her dad gifted her Volnir, and though she was not interested in her dads work she felt an extreme responsibility to work at the shop.
Though remarkably normal and lack-luster in combat, in her Genin years she proved to be an extremely capable engineer and someone with potential in Ninjutsu, having mastered 3 styles early on. As such, at 14 she was offered the chance to help build some relief shelters for refugees during the KCW. Doing so with extreme efficiency gained her the gratitude of her countrymen and her village. Following this, she was asked by the 9th Raikage to begin using her Cobalt to develop a special project. For the last two years she has designed and tested an idea for "an electric rickshaw" that would change the way normal people lived.
With her success in design, she was promoted to Chuunin and is working under directions from the Kage to research projects that would advance the infrastructure of Kumogakure and the world. Currently, she is part-time attending classes to learn more on Fuuinjutsu, a technology necessary for infrastructure.